dmesg - 2012-05-13 19:38
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee2000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3R/EP45-UD3R, BIOS F12 01/25/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 3, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 3583MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 8191M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 512MB, type WB
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5670] f5670
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ dfed6000-dfee0000
[ 0.000000] RAMDISK: 358aa000 - 36c4d000
[ 0.000000] ACPI: RSDP 00000000000f7070 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee2040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee2180 04C5A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee6f40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee6fc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000dfee7000 004D0 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000dfee74d0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 00000000dfee6e40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2096751
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1161216 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee2000
[ 0.000000] PM: Registered nosave memory: 00000000dfee2000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:14100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061930
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8153472k/8912896k available (6566k kernel code, 525892k absent, 233532k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2396.947 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4793.89 BogoMIPS (lpj=9587788)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004034] Security Framework initialized
[ 0.004051] AppArmor: AppArmor initialized
[ 0.004053] Yama: becoming mindful.
[ 0.008566] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012247] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013932] Mount-cache hash table entries: 256
[ 0.014088] Initializing cgroup subsys cpuacct
[ 0.014094] Initializing cgroup subsys memory
[ 0.014103] Initializing cgroup subsys devices
[ 0.014105] Initializing cgroup subsys freezer
[ 0.014107] Initializing cgroup subsys blkio
[ 0.014114] Initializing cgroup subsys perf_event
[ 0.014146] CPU: Physical Processor ID: 0
[ 0.014148] CPU: Processor Core ID: 0
[ 0.014150] mce: CPU supports 6 MCE banks
[ 0.014159] CPU0: Thermal monitoring enabled (TM1)
[ 0.014163] using mwait in idle threads.
[ 0.016615] ACPI: Core revision 20110623
[ 0.019052] ftrace: allocating 27049 entries in 107 pages
[ 0.020407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061369] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] PEBS disabled due to CPU errata.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152028] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152118] #2
[ 0.152120] smpboot cpu 2: start_ip = 9a000
[ 0.244042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244149] #3 Ok.
[ 0.244151] smpboot cpu 3: start_ip = 9a000
[ 0.336039] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336065] Brought up 4 CPUs
[ 0.336068] Total of 4 processors activated (19175.00 BogoMIPS).
[ 0.340118] devtmpfs: initialized
[ 0.341146] EVM: security.selinux
[ 0.341148] EVM: security.SMACK64
[ 0.341150] EVM: security.capability
[ 0.341212] PM: Registering ACPI NVS region at dfee0000 (8192 bytes)
[ 0.341212] print_constraints: dummy:
[ 0.341212] RTC time: 16:24:09, date: 05/13/12
[ 0.341212] NET: Registered protocol family 16
[ 0.341212] Trying to unpack rootfs image as initramfs...
[ 0.341212] ACPI: bus type pci registered
[ 0.341212] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.341212] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.352935] PCI: Using configuration type 1 for base access
[ 0.354009] bio: create slab at 0
[ 0.354009] ACPI: Added _OSI(Module Device)
[ 0.354009] ACPI: Added _OSI(Processor Device)
[ 0.354009] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.354009] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.354009] ACPI: EC: Look up EC in DSDT
[ 0.357925] ACPI Warning: Incorrect checksum in table [TAMG] - 0xAA, should be 0xA9 (20110623/tbutils-314)
[ 0.358054] ACPI: Interpreter enabled
[ 0.358058] ACPI: (supports S0 S1 S4 S5)
[ 0.358075] ACPI: Using IOAPIC for interrupt routing
[ 0.361894] ACPI: No dock devices found.
[ 0.361896] HEST: Table not found.
[ 0.361900] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.361947] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.362053] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.362056] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.362058] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.362061] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.362063] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.362078] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.362122] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.362159] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.362163] pci 0000:00:01.0: PME# disabled
[ 0.362199] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.362240] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.362289] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.362331] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.362380] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.362420] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.362474] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.362491] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.362577] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.362592] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.362656] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.362660] pci 0000:00:1b.0: PME# disabled
[ 0.362679] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.362745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.362749] pci 0000:00:1c.0: PME# disabled
[ 0.362771] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[ 0.362836] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.362839] pci 0000:00:1c.3: PME# disabled
[ 0.362861] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.362926] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.362929] pci 0000:00:1c.4: PME# disabled
[ 0.362952] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.362994] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.363045] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.363085] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.363134] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.363174] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.363227] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.363243] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.363327] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.363385] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.363463] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.363467] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.363511] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.363526] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
[ 0.363533] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
[ 0.363541] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
[ 0.363549] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
[ 0.363558] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf50f]
[ 0.363566] pci 0000:00:1f.2: reg 24: [io 0xf400-0xf40f]
[ 0.363612] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.363626] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.363646] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.363678] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.363693] pci 0000:00:1f.5: reg 10: [io 0xf200-0xf207]
[ 0.363701] pci 0000:00:1f.5: reg 14: [io 0xf100-0xf103]
[ 0.363709] pci 0000:00:1f.5: reg 18: [io 0xf000-0xf007]
[ 0.363717] pci 0000:00:1f.5: reg 1c: [io 0xef00-0xef03]
[ 0.363724] pci 0000:00:1f.5: reg 20: [io 0xee00-0xee0f]
[ 0.363732] pci 0000:00:1f.5: reg 24: [io 0xed00-0xed0f]
[ 0.363805] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
[ 0.363815] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.363826] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.363837] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.363845] pci 0000:01:00.0: reg 24: [io 0xbf00-0xbf7f]
[ 0.363852] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.363903] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.363906] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.363909] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.363913] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.363950] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.364010] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.364106] pci 0000:03:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
[ 0.364168] pci 0000:03:00.0: PME# supported from D3hot
[ 0.364173] pci 0000:03:00.0: PME# disabled
[ 0.364201] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.364225] pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.364238] pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
[ 0.364252] pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.364265] pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.364279] pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.364361] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.364374] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.364378] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.364382] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.364440] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.364456] pci 0000:04:00.0: reg 10: [io 0xce00-0xceff]
[ 0.364484] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.364502] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[ 0.364514] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.364577] pci 0000:04:00.0: supports D1 D2
[ 0.364579] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364584] pci 0000:04:00.0: PME# disabled
[ 0.372049] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.372053] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.372058] pci 0000:00:1c.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.372063] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.372129] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.372139] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.372141] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.372144] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.372146] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.372149] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.372176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.372280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.372311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.372349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.372377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.372480] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.372483] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.372484] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.379467] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.379512] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.379556] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.379597] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.379642] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.379684] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.379725] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.379767] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.379871] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.379871] vgaarb: loaded
[ 0.379871] vgaarb: bridge control possible 0000:01:00.0
[ 0.379871] i2c-core: driver [aat2870] using legacy suspend method
[ 0.380028] i2c-core: driver [aat2870] using legacy resume method
[ 0.380098] SCSI subsystem initialized
[ 0.380138] libata version 3.00 loaded.
[ 0.380138] usbcore: registered new interface driver usbfs
[ 0.380138] usbcore: registered new interface driver hub
[ 0.380138] usbcore: registered new device driver usb
[ 0.380138] PCI: Using ACPI for IRQ routing
[ 0.381384] PCI: pci_cache_line_size set to 64 bytes
[ 0.381469] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.381471] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.381574] NetLabel: Initializing
[ 0.381576] NetLabel: domain hash size = 128
[ 0.381578] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.381588] NetLabel: unlabeled traffic allowed by default
[ 0.381608] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.381608] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.381608] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.388167] Switching to clocksource hpet
[ 0.395287] AppArmor: AppArmor Filesystem Enabled
[ 0.395320] pnp: PnP ACPI init
[ 0.395338] ACPI: bus type pnp registered
[ 0.395424] pnp 00:00: [bus 00-3f]
[ 0.395427] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.395429] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.395431] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.395433] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.395435] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.395437] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.395507] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.395574] pnp 00:01: [io 0x0010-0x001f]
[ 0.395575] pnp 00:01: [io 0x0022-0x003f]
[ 0.395577] pnp 00:01: [io 0x0044-0x005f]
[ 0.395579] pnp 00:01: [io 0x0062-0x0063]
[ 0.395581] pnp 00:01: [io 0x0065-0x006f]
[ 0.395582] pnp 00:01: [io 0x0074-0x007f]
[ 0.395584] pnp 00:01: [io 0x0091-0x0093]
[ 0.395586] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.395587] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.395589] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.395591] pnp 00:01: [io 0x0290-0x029f]
[ 0.395593] pnp 00:01: [io 0x0800-0x087f]
[ 0.395594] pnp 00:01: [io 0x0290-0x0294]
[ 0.395596] pnp 00:01: [io 0x0880-0x088f]
[ 0.395667] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.395670] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.395672] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.395674] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.395677] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.395680] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.395691] pnp 00:02: [dma 4]
[ 0.395693] pnp 00:02: [io 0x0000-0x000f]
[ 0.395695] pnp 00:02: [io 0x0080-0x0090]
[ 0.395696] pnp 00:02: [io 0x0094-0x009f]
[ 0.395698] pnp 00:02: [io 0x00c0-0x00df]
[ 0.395725] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.395770] pnp 00:03: [irq 0 disabled]
[ 0.395781] pnp 00:03: [irq 8]
[ 0.395783] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.395815] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.395838] pnp 00:04: [io 0x0070-0x0073]
[ 0.395873] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.395881] pnp 00:05: [io 0x0061]
[ 0.395911] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.395920] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.395925] pnp 00:06: [irq 13]
[ 0.395957] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.396085] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.396087] pnp 00:07: [io 0x03f7]
[ 0.396092] pnp 00:07: [irq 6]
[ 0.396094] pnp 00:07: [dma 2]
[ 0.396137] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.396272] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.396277] pnp 00:08: [irq 4]
[ 0.396335] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.396484] pnp 00:09: [io 0x0378-0x037f]
[ 0.396489] pnp 00:09: [irq 7]
[ 0.396537] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.396624] pnp 00:0a: [io 0x0060]
[ 0.396626] pnp 00:0a: [io 0x0064]
[ 0.396631] pnp 00:0a: [irq 12]
[ 0.396665] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.396711] pnp 00:0b: [io 0x0400-0x04cf]
[ 0.396713] pnp 00:0b: [io 0x04d2-0x04ff]
[ 0.396763] system 00:0b: [io 0x0400-0x04cf] has been reserved
[ 0.396766] system 00:0b: [io 0x04d2-0x04ff] has been reserved
[ 0.396769] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.396927] pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
[ 0.396985] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.396989] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397113] pnp 00:0d: [mem 0x000cdc00-0x000cffff]
[ 0.397115] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[ 0.397117] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[ 0.397119] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[ 0.397121] pnp 00:0d: [mem 0xdfee0000-0xdfefffff]
[ 0.397123] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.397124] pnp 00:0d: [mem 0x00100000-0xdfedffff]
[ 0.397126] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.397128] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[ 0.397130] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[ 0.397134] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.397136] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[ 0.397137] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[ 0.397139] pnp 00:0d: [mem 0x000e0000-0x000effff]
[ 0.397203] system 00:0d: [mem 0x000cdc00-0x000cffff] has been reserved
[ 0.397206] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.397208] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.397211] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.397213] system 00:0d: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 0.397216] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.397218] system 00:0d: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.397221] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.397224] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.397226] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.397229] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.397231] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.397234] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.397236] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[ 0.397239] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.397257] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[ 0.397301] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.397306] pnp: PnP ACPI: found 15 devices
[ 0.397308] ACPI: ACPI bus type pnp unregistered
[ 0.405353] PCI: max bus depth: 1 pci_try_num: 2
[ 0.405402] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.405406] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
[ 0.405409] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.405413] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.405417] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.405420] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.405423] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.405427] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.405430] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.405434] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.405437] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.405442] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff]
[ 0.405446] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.405451] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.405454] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.405459] pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.405463] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.405470] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 0.405472] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.405475] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.405479] pci 0000:00:1c.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.405483] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.405489] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.405520] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.405524] pci 0000:00:01.0: setting latency timer to 64
[ 0.405532] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.405536] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.405540] pci 0000:00:1c.0: setting latency timer to 64
[ 0.405550] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.405554] pci 0000:00:1c.3: setting latency timer to 64
[ 0.405561] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.405564] pci 0000:00:1c.4: setting latency timer to 64
[ 0.405572] pci 0000:00:1e.0: setting latency timer to 64
[ 0.405576] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.405578] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.405580] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.405582] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.405584] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.405587] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.405590] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.405593] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.405596] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.405599] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff]
[ 0.405602] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.405605] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.405608] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.405611] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.405614] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.405617] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.405620] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.405623] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.405626] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.405629] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.405632] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.405635] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.405682] NET: Registered protocol family 2
[ 0.405902] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.406987] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.410104] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.410544] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.410546] TCP reno registered
[ 0.410563] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.410627] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.410791] NET: Registered protocol family 1
[ 0.410821] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.410838] pci 0000:00:1a.0: PCI INT A disabled
[ 0.410856] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.410871] pci 0000:00:1a.1: PCI INT B disabled
[ 0.410882] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.410897] pci 0000:00:1a.2: PCI INT C disabled
[ 0.410905] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.424038] pci 0000:00:1a.7: PCI INT C disabled
[ 0.424062] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.424077] pci 0000:00:1d.0: PCI INT A disabled
[ 0.424084] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.424100] pci 0000:00:1d.1: PCI INT B disabled
[ 0.424107] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.424122] pci 0000:00:1d.2: PCI INT C disabled
[ 0.424130] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.440017] pci 0000:00:1d.7: PCI INT A disabled
[ 0.440042] pci 0000:01:00.0: Boot video device
[ 0.440053] PCI: CLS 4 bytes, default 64
[ 0.440056] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.440059] Placing 64MB software IO TLB between ffff8800dbed6000 - ffff8800dfed6000
[ 0.440061] software IO TLB at phys 0xdbed6000 - 0xdfed6000
[ 0.440496] audit: initializing netlink socket (disabled)
[ 0.440507] type=2000 audit(1336926248.436:1): initialized
[ 0.485108] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.533424] VFS: Disk quotas dquot_6.5.2
[ 0.533482] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.534019] fuse init (API version 7.17)
[ 0.534111] msgmni has been set to 15924
[ 0.534514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.534547] io scheduler noop registered
[ 0.534548] io scheduler deadline registered
[ 0.534581] io scheduler cfq registered (default)
[ 0.534688] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.534722] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.534770] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.534805] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.534860] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.534894] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.534950] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.534984] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.535058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.535080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.535140] intel_idle: MWAIT substates: 0x20
[ 0.535141] intel_idle: does not run on family 6 model 15
[ 0.535219] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.535224] ACPI: Power Button [PWRB]
[ 0.535283] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.535286] ACPI: Power Button [PWRF]
[ 0.535361] Marking TSC unstable due to TSC halts in idle
[ 0.535368] ACPI: acpi_idle registered with cpuidle
[ 0.537104] ERST: Table is not found!
[ 0.537107] GHES: HEST is not enabled!
[ 0.557528] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.741487] Freeing initrd memory: 20108k freed
[ 0.880490] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920223] Linux agpgart interface v0.103
[ 0.921762] brd: module loaded
[ 0.922514] loop: module loaded
[ 0.922637] ahci 0000:03:00.0: version 3.0
[ 0.922650] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.936037] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.936040] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.936046] ahci 0000:03:00.0: setting latency timer to 64
[ 0.936382] scsi0 : ahci
[ 0.936470] scsi1 : ahci
[ 0.936547] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 19
[ 0.936551] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 19
[ 0.936596] ata_piix 0000:00:1f.2: version 2.13
[ 0.936607] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.936612] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.936651] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.936921] scsi2 : ata_piix
[ 0.936994] scsi3 : ata_piix
[ 0.937353] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 0.937358] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 0.937375] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.937380] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.937416] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.937629] scsi4 : ata_piix
[ 0.937698] scsi5 : ata_piix
[ 0.937989] ata5: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
[ 0.937993] ata6: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
[ 0.938042] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.938048] pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.938077] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.938091] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.938386] Fixed MDIO Bus: probed
[ 0.938404] tun: Universal TUN/TAP device driver, 1.6
[ 0.938405] tun: (C) 1999-2004 Max Krasnyansky
[ 0.938457] PPP generic driver version 2.4.2
[ 0.938552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.938566] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.938580] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.938583] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.938629] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.942541] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
[ 0.942556] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.956013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.956133] hub 1-0:1.0: USB hub found
[ 0.956137] hub 1-0:1.0: 6 ports detected
[ 0.956212] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.956223] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.956226] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.956269] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.960180] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
[ 0.960193] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 0.976011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.976123] hub 2-0:1.0: USB hub found
[ 0.976128] hub 2-0:1.0: 6 ports detected
[ 0.976198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.976211] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.976226] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.976233] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.976236] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.976277] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.976306] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.976416] hub 3-0:1.0: USB hub found
[ 0.976420] hub 3-0:1.0: 2 ports detected
[ 0.976480] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.976487] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.976490] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.976530] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.976559] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.976672] hub 4-0:1.0: USB hub found
[ 0.976675] hub 4-0:1.0: 2 ports detected
[ 0.976735] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.976741] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.976744] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.976783] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.976805] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 0.976914] hub 5-0:1.0: USB hub found
[ 0.976917] hub 5-0:1.0: 2 ports detected
[ 0.976977] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.976983] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.976986] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.977028] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.977048] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.977165] hub 6-0:1.0: USB hub found
[ 0.977169] hub 6-0:1.0: 2 ports detected
[ 0.977228] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.977234] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.977237] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.977280] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.977301] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.977410] hub 7-0:1.0: USB hub found
[ 0.977414] hub 7-0:1.0: 2 ports detected
[ 0.977473] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.977479] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.977482] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.977524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.977545] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.977658] hub 8-0:1.0: USB hub found
[ 0.977662] hub 8-0:1.0: 2 ports detected
[ 0.977772] usbcore: registered new interface driver libusual
[ 0.977806] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 0.977808] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.978175] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.978185] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.978348] mousedev: PS/2 mouse device common for all mice
[ 0.978504] rtc_cmos 00:04: RTC can wake from S4
[ 0.978615] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.978638] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.978728] device-mapper: uevent: version 1.0.3
[ 0.978798] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.978864] cpuidle: using governor ladder
[ 0.978953] cpuidle: using governor menu
[ 0.978955] EFI Variables Facility v0.08 2004-May-17
[ 0.979188] TCP cubic registered
[ 0.979293] NET: Registered protocol family 10
[ 0.979736] NET: Registered protocol family 17
[ 0.979754] Registering the dns_resolver key type
[ 0.979893] PM: Hibernation image not present or could not be loaded.
[ 0.979906] registered taskstats version 1
[ 1.009094] Magic number: 12:42:439
[ 1.009161] pcieport 0000:00:1c.0: hash matches
[ 1.009209] rtc_cmos 00:04: setting system clock to 2012-05-13 16:24:10 UTC (1336926250)
[ 1.009234] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.009236] EDD information not available.
[ 1.266634] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.277261] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.332013] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.440030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.440053] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.454414] ata2.00: HPA detected: current 976771055, native 976773168
[ 1.454494] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
[ 1.454497] ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.456565] ata2.00: configured for UDMA/133
[ 1.460594] ata1.00: HPA detected: current 976771055, native 976773168
[ 1.460674] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
[ 1.460677] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.462742] ata1.00: configured for UDMA/133
[ 1.462850] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.462970] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.463017] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.463027] sd 0:0:0:0: [sda] Write Protect is off
[ 1.463030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.463059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.463235] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.463349] sd 1:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.463383] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.463423] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.463426] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.463459] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.484668] Initializing USB Mass Storage driver...
[ 1.484781] scsi6 : usb-storage 2-1:1.1
[ 1.484840] usbcore: registered new interface driver usb-storage
[ 1.484841] USB Mass Storage support registered.
[ 1.487646] sdb: sdb1 sdb2 < sdb5 >
[ 1.487987] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.496480] sda: sda1 sda2 < sda5 >
[ 1.496778] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.586707] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.586719] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.592015] usb 2-3: new high-speed USB device number 3 using ehci_hcd
[ 1.732056] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 1.732067] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.748124] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[ 1.764121] ata3.01: configured for UDMA/100
[ 1.765276] scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
[ 1.767880] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.767882] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.768000] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.768105] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 1.769707] Freeing unused kernel memory: 920k freed
[ 1.769917] Write protecting the kernel read-only data: 12288k
[ 1.775079] Freeing unused kernel memory: 1608k freed
[ 1.779246] Freeing unused kernel memory: 1196k freed
[ 1.795989] udevd[114]: starting version 175
[ 1.827361] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.827386] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.827419] r8169 0000:04:00.0: setting latency timer to 64
[ 1.827479] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.827926] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000c70000, 00:1f:d0:9b:2a:88, XID 1c4000c0 IRQ 44
[ 1.827930] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.844827] Floppy drive(s): fd0 is 1.44M
[ 1.863656] FDC 0 is a post-1991 82077
[ 1.961695] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x780100 action 0x6
[ 1.961698] ata2.00: irq_stat 0x08000000
[ 1.961702] ata2: SError: { UnrecovData 10B8B Dispar BadCRC Handshk }
[ 1.961705] ata2.00: failed command: READ FPDMA QUEUED
[ 1.961710] ata2.00: cmd 60/08:00:10:69:38/00:00:39:00:00/40 tag 0 ncq 4096 in
[ 1.961711] res 40/00:04:10:69:38/00:00:39:00:00/40 Emask 0x10 (ATA bus error)
[ 1.961714] ata2.00: status: { DRDY }
[ 1.961719] ata2: hard resetting link
[ 2.452025] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.456115] ata2.00: configured for UDMA/133
[ 2.456123] ata2: EH complete
[ 2.485520] scsi 6:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS
[ 2.485892] scsi 6:0:0:1: Direct-Access RIM BlackBerry 1003 PQ: 0 ANSI: 4 CCS
[ 2.486680] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 2.487480] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 2.487755] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 2.490263] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 2.571075] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.571107] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.571432] scsi7 : pata_jmicron
[ 2.571512] scsi8 : pata_jmicron
[ 2.571935] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 2.571938] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 4.280282] xor: automatically using best checksumming function: generic_sse
[ 4.300010] generic_sse: 8902.000 MB/sec
[ 4.300011] xor: using function: generic_sse (8902.000 MB/sec)
[ 4.300535] device-mapper: dm-raid45: initialized v0.2594b
[ 6.724124] usb 2-3: device descriptor read/all, error -110
[ 6.836019] usb 2-3: new high-speed USB device number 4 using ehci_hcd
[ 7.016255] usb 2-3: device descriptor read/all, error -71
[ 7.132015] usb 2-3: new high-speed USB device number 5 using ehci_hcd
[ 7.200251] usb 2-3: device descriptor read/8, error -71
[ 7.368256] usb 2-3: device descriptor read/8, error -71
[ 7.584013] usb 2-3: new high-speed USB device number 6 using ehci_hcd
[ 8.020014] usb 2-3: device not accepting address 6, error -71
[ 8.020027] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 8.284013] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 8.482120] input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
[ 8.482223] generic-usb 0003:060B:6220.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB KEYBOARD] on usb-0000:00:1a.2-1/input0
[ 8.515896] input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
[ 8.515990] generic-usb 0003:060B:6220.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB KEYBOARD] on usb-0000:00:1a.2-1/input1
[ 8.516013] usbcore: registered new interface driver usbhid
[ 8.516015] usbhid: USB HID core driver
[ 8.704020] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 8.847040] usb 7-1: not running at top speed; connect to a high speed hub
[ 8.878176] scsi9 : usb-storage 7-1:1.0
[ 9.601121] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.881061] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 9.884064] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 9.887057] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 9.890059] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 9.890628] sd 9:0:0:0: Attached scsi generic sg5 type 0
[ 9.890766] sd 9:0:0:1: Attached scsi generic sg6 type 0
[ 9.890896] sd 9:0:0:2: Attached scsi generic sg7 type 0
[ 9.891034] sd 9:0:0:3: Attached scsi generic sg8 type 0
[ 9.925052] sd 9:0:0:0: [sde] Attached SCSI removable disk
[ 9.935053] sd 9:0:0:3: [sdh] Attached SCSI removable disk
[ 9.940049] sd 9:0:0:1: [sdf] Attached SCSI removable disk
[ 9.950048] sd 9:0:0:2: [sdg] Attached SCSI removable disk
[ 10.016074] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x780100 action 0x6
[ 10.016077] ata2.00: irq_stat 0x08000000
[ 10.016080] ata2: SError: { UnrecovData 10B8B Dispar BadCRC Handshk }
[ 10.016083] ata2.00: failed command: READ FPDMA QUEUED
[ 10.016088] ata2.00: cmd 60/80:00:c8:5d:48/00:00:27:00:00/40 tag 0 ncq 65536 in
[ 10.016090] res 40/00:04:c8:5d:48/00:00:27:00:00/40 Emask 0x10 (ATA bus error)
[ 10.016092] ata2.00: status: { DRDY }
[ 10.016097] ata2: hard resetting link
[ 10.508024] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.518328] ata2.00: configured for UDMA/133
[ 10.518335] ata2: EH complete
[ 10.618471] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x780100 action 0x6
[ 10.618474] ata2.00: irq_stat 0x08000000
[ 10.618477] ata2: SError: { UnrecovData 10B8B Dispar BadCRC Handshk }
[ 10.618480] ata2.00: failed command: READ FPDMA QUEUED
[ 10.618485] ata2.00: cmd 60/d8:00:00:a7:c5/00:00:00:00:00/40 tag 0 ncq 110592 in
[ 10.618486] res 40/00:04:00:a7:c5/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 10.618489] ata2.00: status: { DRDY }
[ 10.618493] ata2: hard resetting link
[ 11.108024] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 11.112106] ata2.00: configured for UDMA/133
[ 11.112113] ata2: EH complete
[ 11.227692] ata2: limiting SATA link speed to 1.5 Gbps
[ 11.227696] ata2.00: exception Emask 0x10 SAct 0x3 SErr 0x780100 action 0x6
[ 11.227699] ata2.00: irq_stat 0x08000000
[ 11.227701] ata2: SError: { UnrecovData 10B8B Dispar BadCRC Handshk }
[ 11.227704] ata2.00: failed command: READ FPDMA QUEUED
[ 11.227709] ata2.00: cmd 60/98:00:f0:7e:48/00:00:27:00:00/40 tag 0 ncq 77824 in
[ 11.227710] res 40/00:0c:18:9b:48/00:00:27:00:00/40 Emask 0x10 (ATA bus error)
[ 11.227713] ata2.00: status: { DRDY }
[ 11.227715] ata2.00: failed command: READ FPDMA QUEUED
[ 11.227720] ata2.00: cmd 60/18:08:18:9b:48/00:00:27:00:00/40 tag 1 ncq 12288 in
[ 11.227721] res 40/00:0c:18:9b:48/00:00:27:00:00/40 Emask 0x10 (ATA bus error)
[ 11.227723] ata2.00: status: { DRDY }
[ 11.227727] ata2: hard resetting link
[ 11.716024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.738733] ata2.00: configured for UDMA/133
[ 11.738743] ata2: EH complete
[ 23.034395] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.059061] udevd[442]: starting version 175
[ 23.099546] lp: driver loaded but no devices found
[ 23.122682] nvidia: module license 'NVIDIA' taints kernel.
[ 23.122686] Disabling lock debugging due to kernel taint
[ 23.167430] parport_pc 00:09: reported by Plug and Play ACPI
[ 23.167475] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 23.206731] type=1400 audit(1336926272.690:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=592 comm="apparmor_parser"
[ 23.207111] type=1400 audit(1336926272.690:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=592 comm="apparmor_parser"
[ 23.207331] type=1400 audit(1336926272.690:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=592 comm="apparmor_parser"
[ 23.239904] r8169 0000:04:00.0: eth0: link down
[ 23.239915] r8169 0000:04:00.0: eth0: link down
[ 23.240719] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.278322] device-mapper: multipath: version 1.3.0 loaded
[ 23.345851] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.345860] nvidia 0000:01:00.0: setting latency timer to 64
[ 23.345866] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 23.346005] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012
[ 23.350374] coretemp coretemp.0: Using relative temperature scale!
[ 23.350388] coretemp coretemp.0: Using relative temperature scale!
[ 23.350400] coretemp coretemp.0: Using relative temperature scale!
[ 23.350413] coretemp coretemp.0: Using relative temperature scale!
[ 23.353020] it87: Found IT8718F chip at 0x290, revision 5
[ 23.353028] it87: VID is disabled (pins used for GPIO)
[ 23.353037] it87: Beeping is supported
[ 23.353688] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 23.371571] lp0: using parport0 (interrupt-driven).
[ 23.397555] ppdev: user-space parallel port driver
[ 23.430874] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 23.430931] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 23.430958] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 23.467451] hda_codec: ALC889A: BIOS auto-probing.
[ 23.477488] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 23.477651] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 23.477741] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 23.477837] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 23.477942] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 23.478008] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.478131] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 23.478198] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 23.923731] init: udev-fallback-graphics main process (1012) terminated with status 1
[ 23.929790] Bluetooth: Core ver 2.16
[ 23.929813] NET: Registered protocol family 31
[ 23.929815] Bluetooth: HCI device and connection manager initialized
[ 23.929817] Bluetooth: HCI socket layer initialized
[ 23.929819] Bluetooth: L2CAP socket layer initialized
[ 23.929987] Bluetooth: SCO socket layer initialized
[ 23.932467] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.932471] Bluetooth: BNEP filters: protocol multicast
[ 23.936594] Bluetooth: RFCOMM TTY layer initialized
[ 23.936600] Bluetooth: RFCOMM socket layer initialized
[ 23.936602] Bluetooth: RFCOMM ver 1.11
[ 23.945501] type=1400 audit(1336926273.430:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1082 comm="apparmor_parser"
[ 23.945981] type=1400 audit(1336926273.430:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1082 comm="apparmor_parser"
[ 23.999200] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input12
[ 24.104555] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.213216] Adding 19800076k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:19800076k
[ 25.610031] r8169 0000:04:00.0: eth0: link up
[ 25.610760] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.297879] init: failsafe main process (1001) killed by TERM signal
[ 26.327325] type=1400 audit(1336926275.810:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1317 comm="apparmor_parser"
[ 26.327526] type=1400 audit(1336926275.810:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1318 comm="apparmor_parser"
[ 26.327919] type=1400 audit(1336926275.810:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1318 comm="apparmor_parser"
[ 26.328163] type=1400 audit(1336926275.814:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1318 comm="apparmor_parser"
[ 26.329212] type=1400 audit(1336926275.814:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1321 comm="apparmor_parser"
[ 36.240008] eth0: no IPv6 routers present
[ 401.565999] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 401.567252] SGI XFS Quota Management subsystem
[ 401.607787] JFS: nTxBlock = 8192, nTxLock = 65536
[ 401.659123] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 401.702398] QNX4 filesystem 0.2.3 registered.
[ 401.813864] Btrfs loaded
[ 509.696970] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1869.099966] show_signal_msg: 36 callbacks suppressed
[ 1869.099971] aweather[7963]: segfault at 41 ip 00007f2589244f4e sp 00007f256b7fd120 error 4 in libglib-2.0.so.0.3200.1[7f2589210000+f2000]
[ 5202.878876] usb 2-1: USB disconnect, device number 2
[ 6217.303956] sr0: CDROM not ready. Make sure there is a disc in the drive.
[11467.032724] nvclock_gtk[21927]: segfault at 16ff ip 000000000041c68c sp 00007fff4b0a1380 error 4 in nvclock_gtk[400000+66000]